High Molecular Polymer Nonionic Softener Flakes Leveling Agent WEL

High Molecular Polymer Nonionic Softener Flakes Leveling Agent WEL

SOULBIO WEL (Dyeing and softening in one bath Softener)

Chemical Composition

High molecular polymer

Technical Specification

Appearance: pale yellow flakes

PH value: 4.5~6.5 (5～10% solution)

Ionicity: nonionic

Dissolving Method

Temperature raising : Add the flakes in water(room temperature )gradually in the proportion of  5-10%, stir them and heat up to ( 65~75℃ ) and stir them for 30-60 mins again until the flakes

become even paste, then cool it down.

High temperature :Add the flakes in water ( 65~75℃) gradually in the proportion of 5-10%,

stir them for 30-60 mins again until the flakes become even paste, then cool it down.

Properties

Impart very soft, Smooth and full handle to fabric

Good salt resistance , alkali resistance and low yellowing, high hydrophilic property in polyester

Can be used in dyeing process and prevent crease defect because of knotted fabric in dyeing

As a leveling agent, can be used in disperse dyes, reactive dyes (light colour ), acid dyes (light colour )dyeing process with leveling , retarding dyeing and migration dyeing properties ,no dull effect and no influence on fabric’s colour shade and colour yied  

Field of Application

For all kinds of fibres and fabrics, also as a softener, leveling agent in dyeing process

Application

Padding: Dosage: 20～30g/L (10% solution)          Temperature: 30～40℃

               Process: one dip and one pad or two dips and two pads

Dipping: Dosage: 3～8%(o.w.f) (10% solution)      Liquor ratio: 1:10～15

               Temperature: 40～50℃                     Time: 30min

Storage and Packing

             Shelf life: 12 months when store in cool, dry and shaded warehouse

             Packing: 25kg plastic woven bag